Buy Now
Facebook Twitter Pinterest

Why cannot I hook up with ANY wifi entry level?

I can see wifi entry factors in vary, however can’t hook up with them. Open or secured makes no distinction. What may very well be inflicting my subject?


Are you accessing the identical AP with both open or WPA2 connections? If you’re your Cable router could also be restricted on what number of connections it might enable entry although.

I might go to a espresso store some the place which has an open WiFi service and see if it connects that means if it does that factors again to your setup as being the difficulty Vs the iPad.

If you happen to nonetheless cannot join on the espresso store’s open WiFi service I might erase the iPad and reload all the pieces. Ouch!


Tips on how to unlock iPad when its linked with an apple account?

I purchased an iPad four second handed. I am undecided what’s fallacious with it. I restored it to manufacturing unit settings and now when i attempt to activate it , it retains asking me for the earlier house owners apple ID and that i
haven’t got his quantity anymore.. What ought to i do? Is my iPad just about bricked ceaselessly?


Please attempt to activate the iPad . If iPad reveals this gadget is linked with ( then it may be eliminated simply. if reveals this gadget has been misplaced or stolen then can’t do something.

Regular Course of: Requirement is the POP(Bill of the gadget). When you have the invoice of this gadget.

Simply name AppleCare they are going to help you higher. They may take away this inside Three days. Provided that gadget not been stolen or misplaced.

AppleCare want solely gadget invoice and inform them you’re unable to activate the iPad.

For iPad 2,3,four there’s a {hardware} resolution by altering some resistors and by changing from mobile GSM or mobile CDMA to wifi mannequin additionally attainable could be accomplished vice versa which would require to
solder GSM board or CDMA board to wifi mannequin.


Can I exploit a scorching plate to take away an S4 digitizer?

I am positive most individuals right here know that heating up an S4 digitizer with a hairdryer and eradicating it that means could be fairly a chore. I am simply questioning if anybody has ever used a scorching plate to do that
as an alternative? Is it a good suggestion? If that’s the case what temperature do I set it to with out damaging the S4?


Sure, set it to 65C, 5 minutes on all sides go away the S4 on the recent plate whereas taking it off.


Grey traces on LCD after display substitute, now iPad wont energy



Do a tough reset. By unplugging the logic board you successfully did a tough reset. And likewise strive utterly disconnecting the logic board and reinstalling it. 

“Ghost touching after digitizer substitute”

I changed the digitizer of a white S4  and after some time of use the S4 began registering random touches, typing random phrases and stuff like that. i believed it was the digitizer so i received a
second one and its doing the identical factor. The digitizer flex cable appears to be tightly in.


It sounds such as you may need a {hardware} or a software program subject, attempt to open up the gadget and ensure all cables are on appropriately by eradicating and reinserting. It May be a ribbon connector subject.
If that does not work you could have to do a restore or a manufacturing unit reset. 

Attempt Under First:


1. Tremendous clear the digitizer contacts and seat them firmly. 

2. Flatten the body to inside a 1/16th of an inch.

3. I Modified ribbon connector.

The primary two digitizers had been jittery. I returned the primary one however since they’re so low cost I simply purchased a 3rd one which I used within the ultimate restore. So there’s a small probability that the primary two
had been faulty or I did not seat them adequate (however I doubt it.) I additionally may need over-heated certainly one of them in my try and seat it on the warped body. However the ultimate digitizer is working nice and
so I’m betting on the warped body being the offender.


My Smartphone reveals charging image, however isn’t charging…

it’s displaying the charging image, however not charging… What’s going on?


Make sure that you’re charging utilizing the right wall adapter like this one right here. Additionally guarantee that the charging cable isn’t longer than three ft (or one meter). There’s an excessive amount of voltage drop
for the Smarphone to cost correctly on most longer cables. Some Smartphones additionally is not going to correctly cost when plugged in to a PC or Mac – not sufficient voltage over the conventional USB connection.

Most of what I see is {hardware} failures, and it is a widespread one known as ‘faux charging’ that may occur after water harm or drop harm damages in telephones which causes a {hardware} fault on the logic
board. I had an S3 mini these days that had an identical problem—charging okay however the battery share by no means went up or down….that one turned out to be a tiny resistor close to the battery connector had
rubbed off.


S4 faux charging might be a burned U2 charging ic chip, identical to within the S3. I’ve seen this loads this yr

I do know it is form of late to reply this however to anybody who’ve this subject, it is your charger cable, within the cable there are a number of wires for various issues, I do not know precisely which does what,
however a few of them are for charging , a few of them are for USB connection , I believe these wires for charging are broken and once you plug it in , Smartphones thinks it is related to the charger
due to these wires that aren’t broken but…you should purchase one other charger cable, like I do , each single month !